> Products > Industrial Microwave Drive Power Supply > 1300W 1.3KW Magnetron Power Supply > 6.4V20A -4000V2.2A high voltage switching powers

6.4V20A -4000V2.2A high voltage switching powers

Brand : Cassspower
Product origin : Shenzhen, China
Delivery time : 30 days
Supply capacity : 50K

6.4V20A -4000V2.2A high voltage switching powers

Features:

·Power Factor Correction with stable operation mode,Using soft switch on high voltage and filament.

·DSP monitor,Effectively save the volume,fast response on abnormal protection. Support a variety of communication methods.

·Single-phase input Voltage at 220Vac, output power rating is 1300W,can be adjusted at 30~100% full power.

·Protections: Short circuit / Over voltage /Over temperature/Fan failure etc.

·Filament current will be reduced to about 8A after starting Hi-voltage for a period of time,which to increase the lifetime of the magnetron.

·Microwave output power is stability while input voltage changed.

·cooled by fan.

·Hi- power factor: >0.9 while in full load.

CY power 1.3KW magnetron power supply has the same performance development as TOSHIBA 2M248E,Built-in active PFC function, power factor is up to 0.9, Control and monitoring via PC or PLC High pressure and filament separation,The high pressure parts and the filament parts are integrated on the power board. Single phase input voltage: 220Vac?0%; Multiple protection function; High voltage power control. Can be adjusted in the max power rating range via outer PC or PLC control. High efficiency, High reliability, long lifetime with low EMI.

1.3KW magnetron power is belongs to Modular structure & an independent module, its connected with the magnetron ,220Vac voltage to be used on magnetron cooling fan .Anomaly detection protection to magnetron fan.


Indicator: ON,HV,RD,TD.

Output line:Red silica gel Hi-voltage line connects magnetron anode; Yellow/Green line connects magnetron; Black/Red line connects magnetron AC FAN.

Power indicator:

ON(Green lights): Power on and DSP starts working

HV (Red lights): Starts Hi-Voltage

RD/TD(Yellow lights): Lights flash -Machine is in working order .


Specification

MAX INPUT POWER RATING

INPUT VOLTAGE RANGE

FEATURE

OUTPUT POWER RATING RANGE

OUTPUT VOLTAGE

OUTPUT CURRENT

POWER RATINGTOLERANCE

1300W

180V—264Vac

Single-phase

Hi-voltage

30~100%

-4000dc

MAX.

≤0.35A

≤±5%

Filament

100W MAX.

3~8Vac

7-12A

≤±10%

Output power rating

Can be work continuously under -10~60℃/output power rating:1300W


Reference standards and specifications

GB/T 2423.1-2001 Environmental test of electric and electronic products; Part2:Test methods / test A: low temperature

GB/T 2423.2-2001 Environmental test of electric and electronic products; Part2:Test methods / test A: High temperature

GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products - Test methods for Ca: constant damp heat test

GB/T 2423.4.1993 Basic environmental testing procedures for electric and electronic products - Test Db: alternating hot and humid test method

GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2: Test methods / test Ea and guidance: shock

GB/T 2423.6-1995 Environmental testing for electric and electronic products - Part 2: Test methods / test Ea and guidance: collision

GB/T 2423.8-1995 Environmental testing for electric and electronic products - Part 2: Test methods / test Ed: free fall

GB/T 2423.10-1995 Environmental testing for electric and electronic products - Part 2:

Test methods / test Fc and guidance: vibration (sinusoidal)

GB/T 2423.11-1997 Environmental testing for electric and electronic products - Part 2:

Test methods / test Fd: Wide band random vibration - General requirements

GB/T 2423.22-2002 Environmental test for electric and electronic products - Part 2:

Test N: temperature change

GB/T 14508-93 Environmental conditions of goods transport machinery for grade highway


Environment condition

Item

Project

Technical Specifications

Unit

1

Working TEMP.

-10+60

2

Storage TEMP.

-20+80

3

Working Humidity

0%90%

4

Cooling mode

Cooling with built-in DC fan

5

ASL

3000

m

6

MTBF

≥50,000

H


Electrical Requirements

1

Input

Item

Project

Technical Specifications

Unit

1.1

Input Voltage

220

Vac

1.2

Input voltage range

180264

Vac

1.3

AC Input Voltage Frequency

4753

Hz

1.4

Efficiency

≥90%

1.5

Max Input Current

≤10

A

1.6

Input power factor

>0.9

2

Control Requirements

2.1

Power regulating range

The output power is controlled by external PC or PLC

2.2

ON Indicator

After the normal start of the power supply part, the lamp is bright.

2.3

HV Indicator

When there is a high voltage output, the light is bright.

3

Output

item

Project

Technical Specifications

unit

High pressure

Filament

3.1

Input power voltage regulation rate

≤±5%

≤±10%

W

3.2

Output current range

00.35

712

A

3.3

Output voltage range

3.54.2KVdc

3V-8Vac

V

3.4

ON/OFF power -High voltage overshoot

≤4300

V

3.5

Acoustic noise

≤50

dB

4

Protection

4.1

Small filament current

5

A

4.2

Over current protection of high voltage partial switch tube

≥20A

4.3

Over voltage

7KV

4.4

Over TEMP.1

Environment TEMP≥65℃

45

Over TEMP.2

On the protection of the power rectifier bridge, when the temperature is higher than 95℃ , turn off the filament&high pressure but not deadlocked.Then restart the power supply after the temperature to be reduced to normal.

4.6

Over TEMP.3

When starting the power supply, the high voltage MOS tube temperature need to be less than 83℃ to start high pressure; otherwise it will open the DC fan to make the high pressure MOS tube temperature below 83℃ ,and then to start high pressure.

4.7

Communication protection

Can not start high voltage without communication; high voltage began to work and communication to be turn off over 15S,then turn off the filament, high voltage deadlock.

4.8

Filament short circuit, filament open circuit, high voltage short circuit, high voltage open circuit, input under voltage, input over voltage, output over power rating.

turn off the filament, high voltage deadlock.

4.9

AC fan open circuit protection

turn off the filament, high voltage deadlock.



Safety standard

Item

Project

Test condition

1

Electrical strength

Input &

Output

1500Vac/10mA/1min

Input&earth connection

1500Vac/10mA/1min

Output&earth connection

500V

2

Insulation resistance

Input &

Output

≥10MΩ@500Vdc

Output&earth connection

≥10MΩ@500Vdc

Input&earth connection

≥10MΩ@500Vdc

3

Safety approval

TBD


Environmental test requirements

item

Test item

test condition

inspection item

1

High temperature storage test

1. TEMP.:80℃2hours

2. Not packaged. No power

1. Appearance

2. Electrical performance (recovery in 2 hours at normal temperature, normal operation)

2

Low temperature storage test

1. 20±5℃2 hours

2. Not packaged. No power

1. Appearance

2. Electrical performance (recovery in 2 hours at normal temperature, normal operation)

3

High temperature test

1. At rated condition

2. Environment TEMP.:60℃

1. Output voltage of switch machine

2. Normal performance

4

Low temperature test

1. At rated condition

2. Environment TEMP.:10℃

1. Appearance

2. Normal performance

5

vibration test

Can withstand 5500Hz random vibration in three perpendicular directionsThe 510Hz frequency range acceleration spectrum density 10m2/s3,10-200Hz frequency range acceleration spectrum density 3m2/s3 200-500Hz frequency range of the acceleration spectral density is 1m2/s3,in each 20 minutes.

6

impact test

Half sine wave, acceleration:20Gpulse width:11mSX,Y,Z in 3 directions, 3 times each


6.4V20A -4000V2.2A high voltage switching powers

The mechanical properties and the definition of connector (unit:mm)

Dimension (material: aluminum / thickness: 3mm)

Length:257.5mm,width:165mm,height:130mm,refer to the size as below,8 U shaped holes with a radius of R2.75 are fixed holes of the outer shell, and fixed by the bottom and the side.


Bottom fixing method,refer to the pore size as below(85mm、40mm):


Side fixing method,refer to the pore size as below(30mm、70mm):


Terminal definition

A.Through the metal hose to the magnetron (line 3m)

①Filament AWG16# red 2

②Ground AWG16# yellow green 1

③AC fan power cord: 2 red black

B.Power input terminal: 3 pin input terminal

Two RJ45 net port terminals are used as the communication interface, and the two interfaces are connected in parallel.

The relationship, it is convenient to be extended. Pin definitions such as shown in the figure, foot 1,2 is 485+; foot 7,8 is 485-.

Packaging and Transport :

Standard export carton. Each piece is packed by vacuum plastic bag into a inner box then 2pcs to a carton.

Delivery Detail: 10-20working days against payment.


Our Services

1. Any inquiries will be replied within 24 hours;

2. Professional manufacturer , welcome to visit our website;

3. OEM/ODM available:

a) Print logo on our products

b) Customized specification

c) Customized color package box

d) Any your idea on our products,we can help you to design and put it into production

4. High qulity,fashion design,reasonable&competitive price,fast lead time

5. After-sale service:

a) All products will have been strictly quality checked in test house before packing

b) All products will be well packed before shipping

c) All products have 1-2 years warranty, and we sure the products will be free from maintenance within warranty period

6. Faster delivery:

Sample order in stock, and 3-7days for bulk production

7. Payment term:

L/C T/T open account transaction, westion union & paypal


Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
MessageX